Disclaimer

Information on this blog is raw and sometimes unverified reporting straight from the road by teams. The event will issue a media release for any events requiring an official notification.

Note that links in blog entries are not maintained, so while a link may be verified to work on the day of publishing, this is not guaranteed beyond that day.

Sunday, October 25, 2009

Ready to go!

Friday and Saturday Oct 23 and 24.

The last two days have seemed to Blur into one .

We finish rebuilding the battery pack and in a couple of hours we are ready to do some laps.

Tom laps and on his second lap after being baulked by another solar car travelling slower than him he slows and the car stops. We have to tow back down the drag strip and across the track at the end of the pit lane. Peter S helps us by clearing the track so we can cross.

We find the problem, an Anderson connector that has not been pushed in firmly has worked its way loose with vibration. Phew and easy fix. We do some more laps, we are happy with the car's performance and we set up ready to go tomorrow.

Sat. Tom, Doug and I get to the track around 7:30 the other drivers arrive at 5 to 8 and we go to the driver briefing. 8:45 Peter S walks past I say we are ready. He says get your driver in and go, we do.

We sit at the end of the pit lane waiting for our partnered car but it doesn't show so Trent ends up going round the track by himself. Leeming is first on the track and Leeming is the first car to Qualify and be registered for the World Solar Challenge. For the rest of the day we charge the batteries and pack up.

During the day Aurora posted the fasted lap and whilst trying to beat them Unicore from Belgium slides their car off the track and breaks the front suspension. We hear later in the day that they fix their car but have another crash trying to beat Aurora's time. This is rumour passed on by the Nuna team. We will confirm this morning on the grid.

It is currently 5:00am many team support crews staying here have already left we will take the car to the start grid at 5:30am.

Adelaide here we come.

Blog 24th October: qualifying

The day starts at the track.

Today is track testing: each car must run a timed lap; then pass a steering test and a braking test, both at 35 km/h.

Peter Schloite runs a meeting for captains and drivers in which he explains how the whole day will work: cars will go out in pairs onto the track: either a pair of fast cars, or a pair of slow cars. Then we adjourn back to our respective pits.

I fire up the telemetry system. It (flip a coin...) works.

John lets Peter know that our car is ready to go. Since Peter can't find any other cars that are ready to go, he sends our car out first, by itself. We do our timed lap, and post 3'14". Then our car pulls into the drag strip to do the steering and braking tests. The only thing we do wrong is that we do them at faster than the mandated 35 km/h. But it's still a pass.

We are qualified. No other cars are yet qualified.

For a few minutes, we are winning the World Solar Challenge.

Then Nuna and Aurora go out on the track, and also qualify, beating our lap time by a large margin. Aurora post 1'53", with Nuna about a second behind them. (For comparison, V8 supercars do this track in about 1'09".)

Willetton's Sungroper qualifies 0.68 seconds faster than us.

I download 200 megabytes of stuff that John Treen has suggested will help with the telemetry. I also field some phone calls from my boss, who is a few hundred kilometres away in the Timor Sea, setting up some equipment on a floating oil production and storage facility.

We go to the briefing meeting at the showgrounds, where we meet our observer for tomorrow morning. Then we return to the pits, clean the array, pack the contents of the pit (including the car) into trailers and vehicles, and retire to the accommodation.

Tomorrow we begin the World Solar Challenge.

-- Doug Burbidge http://dougburbidge.com/

Saturday, October 24, 2009

Student Blog 22 Oct

The team is getting used to early starts whether they like it or not, and the last two days were no exception. Thursday was scrutineering day and the team was awake at the crack of dawn to collect the car and bring it to the Darwin showgrounds. That's a bit of a lie, actually. We were told to get up at the crack of dawn, and did, but found that only a few of us would be needed, while the rest stayed back at the hotel and complained that we could have slept in.

Anyway, the scrutineering process is where teams hoping to compete in the Global Green Challenge bring their cars to be put under intense scrutiny by collections of officials. These officials ensure that the vehicles are in compliance with the long list of rules and regulations for as fair and safe a competition as possible. For example, the size of the array is measured to ensure it does not exceed six square metres, the electrical system is checked to make sure it can be turned off quickly in an emergency, and the battery boxes have very technical cable ties and string put through them, which will be checked in Adelaide to prevent any ideas we might get of tampering with the batteries.

The whole process took a few hours and at the end, Hammerhead fell largely in line with the rulebook. The only faults the scrutineers found were with the brake lines coming into contact with the body, solved with a few cable ties, and the batteries which could not be isolated (turned off) by the driver. The officials recommended we install a battery contactor, a very expensive, complicated and difficult to install piece of equipment, not to mention that there are hardly any available in Darwin that will work on the DC current our car uses.

Mr. Beattie, Mr. Morgan and Doug spent a few hours running around Darwin's industrial area looking for one of these devices, fruitlessly. Mr. Morgan then piped up with the idea of attaching a bit of rope to two circuit breakers that the driver can pull in an emergency. We are going ahead with this plan, and will justify our decision with the K.I.S.S. principle when we show the scrutineers again.

Meanwhile at Hidden Valley, more adjustments are made to bring the car up to standard and make sure all components are properly lubricated and working as they should. The temperature is a hot and humid 36 degrees (as usual), but thankfully an afternoon breeze had come to relieve us. Clearly more teams had problems at scrutineering, since more and more teams returned to Hidden Valley. The highlight of the afternoon was rival team Willetton Senior High School arriving at the track (finally) and doing laps only half an hour after arriving. Their car looks very simple, a few extremely heavy solar panels attached to a chassis I guess they've stuck to the K.I.S.S principle too.

Love,
- The Team

Friday, October 23, 2009

Doug's blog 23rd October: breakers and string

Yesterday was scrutineering.

We failed.

We rocked up somewhat before our appointed time at the Darwin showgrounds, some of us coming straight from our accommodation; some of us detouring to Hidden Valley to pick up the solar car. We all register, our drivers weigh in, and we are given ballast bags.

Meanwhile, Hammerhead has been moving around the scrutineering station. We pass the first two stations with flying colours. Since the first two stations are stickering (where they put a World Solar Challenge sticker on the car) and measurement (where they weight the car), it's hard to fail these.

The third station is driver seat angle and ingress/egress. The seat angle is close to passing, but not quite. Which is odd, because the same seat passed last year, and the rule hasn't changed. They let us through anyway.

They check the eye height. The rules require that the driver's eyes be at least 700mm above the road, and the way they check this is they put a driver in the car wearing black goggles, and shine a laser in. If the laser is below the mark on the goggles, it's a pass.

The laser hits out car below the bottom of the windscreen. So that's all good.

The ingress/egress rules require each driver to get in to the car in 15 seconds, and to get out of the car in 15 seconds. Some other teams are having trouble with this; we do it in half the time available.

Next is NT Roads, who check the car mechanically. They ask us to wrap some brake lines to protect them from abrasion. No worries.

Then it's electrical. There's a new electrical rule this year which requires battery isolation to be built integral to the battery box. Said isolation is to be operable by both the driver and the emergency pull on the side of the vehicle. Our car has isolation in both of these places, but it's not integral to the battery, so it leaves a metre or two of wire live, which is a no-no.

(Rumour later is that about half the teams have failed on this same rule.)

So we must re-work our isolation. John Storey, the electrical scrutineer, explains a way to do it with a 12V supply and some additional batteries to drive that supply.

We return to the track. Steve Morgan, on hearing about the problem says, "Just use some string!".

John and I pick up the relay from our old battery management system, and head out. We go to MM, who send us to Delta, who send us to ISAS, who haven't got a relay that big. We go back to the showgrounds and show our relay to John Storey, who says it's unsuitable: it's a solid state relay. The rule specifies that the isolator must be a mechanical device, and ours isn't. He tells us about a device called a "contactor", which is basically like a relay only bigger and uglier.

So we go back to ISAS, who send us back to Delta. We have a lengthy chat to Dennis at Delta, and John realises that we don't need the complicated deal with the 12V supply and the auxiliary battery pack if we have two separate breakers: one for the driver, and one for the side of the car. Both must still be contained within the battery pack, so to get the pull to those two locations, we'll just use some string!

Dennis sends us to MC, who sell us two breakers and some DIN rail. Back to the pits, to find the box we already have is just too small, so off to Bunnings and Jaycar to buy a bigger box and some conduit to run the string through.

Back at the pits we do enough work to prove to ourselves that this solution will work, then end for the day. Dinner is whatever we want at Mindil Beach markets.

The following morning it's a 7:30 departure for the pits to finish our new battery breaker system and some attendant rearranging of wires.

Then we want to get some track testing. I fire up the telemetry system and today it (flip a coin...) doesn't work.

We go without telemetry, and the car gets as far as the first corner, where it conks out. The people in the follow car leap out and have a look, but can't see what's gone wrong. They leave the solar car where it is and return to the pits to check with Challenge personnel as to how to retrieve it. They instruct us to bring it back up the drag strip. Peter S, the Challenge safety officer, meets us out there and guides us through the tyre debris all over the strip as we tow Hammerhead back to the pit. We troubleshoot, and track down the fault to a connector that I had assembled with insufficient force. We replace the connector, and the car goes again.

We do several laps, returning to the pits after each lap or two to change drivers. The car performs fine, except for the telemetry. Most people return to the accomodation while John goes to Jaycar for a null modem cable to help me debug it. We use the cable to grab a boot log from the car, and return to accommodation. This evening, most of the students will go to an official do at Parliament.

-- Doug Burbidge http://dougburbidge.com/

Thur Oct 23 - Scrutineering

Up early and take a small crew of three, Ellie, Roxy and Kirsty and I go out to the track to get the car ready for scrutineering. We remove the tape from the battery boxes and I remove the charging wires from the batteries. The drivers arrive minus Doug to practice ingress and egress. The boys easily manage to get in and out in the 15 sec allowed, this includes fastening the seat belt. Car goes in the trailer and off we go to Foskey pavilion at the show grounds.

We are the second car for the day, I get the team organised and signed on then we bring the car in. Stickers on and photo taken, next the weigh in. 310kg, heavier than I thought, but their weighing method is not precise as they only have two scales and can only weigh half the car at a time.

Next ingress and egress but we have to wait for Cambridge University, They struggle to demonstrate that they can get in and out in 15 seconds. We do it easily. Next a mechanical check. No problems, now NT licensing, they suggest we cover some of the brake lines with duct where they pass through the Ayres composite panel, that's an easy fix.

Now electrical, it seems I should have read more into that rule affecting the charging wires coming out of the batteries. It also means that we need to have the batteries isolated at the battery box and no "live" wires can come from the battery. This will cause us quite some work and we may struggle to find the parts needed in Darwin. Doug I will end up spending some hours talking through the problem and a particularly helpful guy, Denis at Delta electronics helps us work through it and sends us to where we can get some appropriate circuit breakers. Our solution will be a mechanical one with pull wires to the outside of the car and to the driver.

Next we go to battery scrutineering and we are done.

Back to the track and work on the car.

We don't quite get the batteries finished, we head back to camp. The team except for my self heads to Mindle beach markets. I get some washing done and watched the News, ABC TV cameras visited our car today and took quite a bit of footage, There was nothing on the news. By the time the team gets back from the markets I am ready for bed.

Friday get car finished do some laps start preparing for the journey South.

Stay tuned.

John Beattie
Leeming SHS
Solar Car Team.

Thursday, October 22, 2009

21 October - Bluetooth and Blunt Objects

21 October

Yesterday I focused on the telemetry. There's a Bluetooth dongle connected to an embedded computer in the car, which turns the car effectively into a Bluetooth device, visible to other computers. So we fire up a laptop, and tell it to search for Bluetooth devices, and the car pops up on the screen.

The first problem is that Windows wants to know the PIN for this new device. We guess a few at pseudorandom (0000, 1234, etc.), but have no success. We phone John in Perth who wrote the software, and he tells us that it's 7260, which is the model number of the embedded computer board.

Obvious, really. Why didn't we think of that?

(The reason that I am documenting this PIN here is that in two years I will have forgotten it, and will then search my own blog in order to find out what it is.)

We muck around with the boards to general success, and then move the embedded computer to a new location in the car, one that will be less vulnerable to getting hideously crushed whenever we lift the batteries in and out of the car.

After lunch we return, and test the car computer in its new location.

It doesn't work.

Damn.

Windows is showing it as a Bluetooth device, but not as a Bluetooth _network_ device, which is a necessary thing for it all to actually work. I rearrange things, reboot things, spin thrice widdershins, call John in Perth, etc., all to no avail. Some of my testing is done in the front seat of our follow car as Tom does test laps.

We wrap for the day without me solving the problem.

We get partway back to our accomodation before I realise that I've forgotten to turn off the car. "We've forgotten something, go back!" is becoming something of a catch-cry for the team.

Today it was down to the pits again for a little more testing before our next thing. We get there, and discover that we've left the Bluetooth dongle back at the accomodation. "We've forgotten something, go back!" And John does.

The rest of us stay at the pit and clean the sides of the trailer, because our next thing is a visit to St John's school.

John returns with the dongle, and I continue to attempt to narrow down the problem. It starts working again. I don't know why.

We pack the car into the trailer to transport to St. John's school. I am reminded of Hofstader's Law: "Everything takes longer than you expect, even when you take Hofstader's Law into account."

We visit the school. We're visiting this particular school because the principal is married to the principal of Leeming. The visit goes well, and most of the team return to the accomodation for lunch, while I and a few others go take the car back to the pit for more troubleshooting.

The Bluetooth stops working again. I don't know why.

There's a Tesla Roadster in the car park in front of the pits, charging. The charge cable is connected to the car at the point you'd expect the fuel cap to be, and the cable is as thick as the hose on a petrol bowser. The other end of the cable connects to a generator on the back of a truck. The generator is bigger than the car.

The Bluetooth starts working again. I don't know why.

I am becoming gradually more of the opinion that it is not Windows' fault, but is a race condition on the car computer.

Steve Morgan and crew work on the brakes. There are two sounds of Hidden Valley for me: one is the sound of a solar car zooming down the straight. This always causes me to glance up, too late: the solar car is no longer visible through the narrow end of our pit, and the only thing I see is the solar car's follow wehicle. The other sound is Steve Morgan calling, "Press... release... press... release...", as they bleed air out of the brake lines.

We end the day with the Bluetooth still working, and with us (reasonably) ready for tomorrow morning's event: scrutineering.

-- Doug Burbidge http://dougburbidge.com/

Vist to St Johns and Preparing for scrutineering

Wed Oct 22.

This morning we visit St John's College this afternoon we will need to get the car ready for scrutineering. A few of us head out to Hidden Valley to do a little work on the car prior to taking it St John's for the visit, we are keen to get the telemetry going. When we get there we have forgotten the laptop with the Bluetooth dongle in it. I go back to get it. Fortunately peak hour traffic in Darwin is not so peak and I make the 15km round trip in good time.

When I get back the trailer is washed and the car is lined up with ramps I throw the Bluetooth to Doug and go about moving trailers to hook the Hilux onto the the solar car trailer. We check the lights and only the brake lights work, I fiddle with, pull plugs apart, check cable joins but still only brake lights. Ross arrives and we decide that he will follow the car and be our indicators. Radios allow us to tell Ross when we are changing lanes etc…

We get to St Johns and enjoy Morning tea and mingling with the student leadership team before meeting the rest of the school. Our students talk to theirs and we take a couple of them for a spin on their oval. I feel the morning has been a success and we head back to the track.

In the afternoon the team gets busy with the car, brakes are a concern and group work together to solve that problem. It seems joins in brake lines that were connected two years ago need to be revisited. Telemetry is now working, not sure why but Doug can't seem to break it so lets hope it works tomorrow. We apply mandatory stickers, check tyres, hook up head lights and collect and sort safety equipment. We go through a mental list with the team making sure we haven't forgotten any thing. In the evening we re-read the rules to make sure that we have not overlooked anything. I discover that the way I have set up the batteries for external charging contravenes one of the rules so I will have to change that first thing in the morning.

Hamburgers for Dinner, The patties made in the Girls room and I cook them in ours. Nuna have beaten us to the BBQ tonight. We beat them to it last night.

Scrutineering tomorrow 9:30am at Foskey Pavilion. Stay tuned.

John Beattie
Leeming Solar Car Team.